Climb Milling

Cycle: Pocketing

In the Pocketing cycle, the tool path moves always in clockwise direction. If this option is turned on, tool path movement is counter-clockwise.

$image\052_shg.gif$

Cycle: Zig-Zag

When using the Zig-Zag cycle, the optional Finishing Path and One-way Zig-Zag toolpath's are affected by this parameter.

The example below shows how the 'Climb Milling' option affects the Zig-Zag cycles toolpath in case 'Oneway Zig-Zag' is active.

Climb Milling = OFF	Climb Milling = ON