|
|
EZCAM Help |
|
|
EZCAM Help |
Depending on the currently selected machining cycle, the Depth parameter has slightly different meanings. See the table below for more cycle related information.
|
Turn, Face Back-Face, Bore Depth parameter specifies the radial depth of each roughing pass. |
Groove Depth specifies the incremental depth step that is finished along the complete groove profile before continuing to the next step. |
|
|
|
|
Thread Depth specifies the total radial depth of the thread. When the Depth field is selected after entering the Lead, the thread Depth is automatically calculated based on a 60 degree thread form. You can leave the value as is or modify it depending on specific needs. |
Drill Depth specifies the total depth of the hole. |
|
|
|
|
Profile Depth parameter specifies the radial depth of each roughing pass when using the profile cycle in combination with the Total Stock parameter for contour parallel roughing.. |
|
|
|
|
